StartHarvesting machineryAGCO › Gleaner A85

AGCO Gleaner A85

Built: 2007-2008 · Series: Other models

More machines from model year 2007

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The AGCO Gleaner A85 is a machine built by AGCO. Production: 2007-2008. The engine delivers 425 hp (317 kW). The engine comes from AGCO/SISU. The model was built in Hesston, Kansas, USA. The fuel is diesel. Its predecessor was the AGCO-Allis Gleaner A86. Rated output across the AGCO range ranges from 28.4 to 425 hp; the Gleaner A85 sits at the top of that range with 425 hp. Its immediate neighbours are the Gleaner S77 Tritura below it with 370 hp. 101 AGCO models across 7 series are on record. The model is listed under Harvesting machinery. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine makeAGCO/SISUcorrect
Fueldieselcorrect
Power425 hp (317 kW)correct

Origin and approval

PlantHesston, Kansas, USAcorrect

Other data

CombineBiggercorrect
Hide agcoShowcorrect
Hide agco-allisShowcorrect
Hide deutz-allisShowcorrect
PredecessorAGCO-Allis Gleaner A86correct

Frequently asked questions

How much power does the AGCO Gleaner A85 have?

The AGCO Gleaner A85 delivers 425 hp.

When was the AGCO Gleaner A85 built?

Production years: 2007-2008.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare