Ivecon Other models
1 model in this series
Ivecon 220-36PT 6x2/4 – heavy EU class N3 truck from 1990: six-cylinder engine, 25,500 kg gross weight and a three-axle layout with a 3,830 mm wheelbase
The 220-36PT belongs to the heavy truck class common around 1990 in European long-haul and construction-site transport. The 6x2 axle formula in the type designation indicates that the vehicle has three axles with six wheels, of which one axle is driven.
Read on 3 more paragraphs
For the 220-36PT the register lists a six-cylinder engine. Kerb weight is 7,820 kg, gross vehicle weight 25,500 kg. The vehicle is 2,500 mm wide with a wheelbase of 3,830 mm, carried on six wheels across three axles.
At 25,500 kg gross weight the 220-36PT falls into EU vehicle class N3 for heavy trucks over 12 tonnes. The short 3,830 mm wheelbase with three axles is typical of tipper and construction-site vehicles, which must carry a large payload on a compact vehicle length while staying manoeuvrable.
When buying a used vehicle of this age and duty profile, check the condition of the frame and suspension after decades of construction-site work, the brake system on a vehicle of this weight, and wear on the axles and differential. Drivetrain parts for a vehicle of this age are sourced mainly through independent commercial-vehicle workshops and used-parts dealers. The condition of any tow coupling fitted, and wear on the suspension bushings and pins after years of construction-site work, are also worth a close look before buying.
Sources: SpecCodex-Register: Kennwerte des Modells Ivecon 220-36PT 6X2/4
Models
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.