Cte Other models
3 models in this series
CTE – other models: the collective page of aerial-platform bodies outside the named ranges, with 30S12, 35S12 and 35S14 on a 3.5-tonne chassis, four-cylinder diesel of 2,287 cm³, 3,325 kg kerb weight and 7,680 to 7,890 mm length
This page gathers the CTE vehicles the register could not assign to a named range: 30S12, 35S12 and 35S14. CTE of Rovereto builds aerial work platforms on light-commercial chassis; this maker's type designations of a number and the letter S give the load and reach class of the platform, here consistently on a 3.5-tonne chassis with a four-cylinder diesel.
Read on 3 more paragraphs
The register lists here 3 versions with a displacement of 2,287 cm³ from four cylinders, a uniform kerb weight of 3,325 kg, a gross weight of 3,500 kg, lengths from 7,680 to 7,890 mm and widths from 2,200 to 2,250 mm.
Aerial platforms on a 3.5-tonne chassis such as CTE's are aimed at tree care, façade and building work and municipal operators who need equipment that can be driven on an ordinary car licence while still reaching sufficient height, placing them between small trailer-mounted platforms and large truck-mounted ones.
On a used CTE platform of one of these three versions, besides the condition of the chassis with its four-cylinder diesel, the condition of the hydraulics, boom bearings and platform basket, the tightness of the hydraulic cylinders and the inspection sticker and service history count in particular, since aerial platforms are subject to recurring inspections by qualified examiners; parts run through CTE and its sales partners.
Sources: SpecCodex-Register: Kennwerte der Modelle Cte (weitere Modelle), CTE (Hersteller)
Models compared
3 of 3 models.
| 30S122021-2021 | 35S122021-2024 | 35S142021-2022 | |
|---|---|---|---|
| Cylinders | 4 | 4 | 4 |
| Displacement | 2,287 cm³ | 2,287 cm³ | 2,287 cm³ |
| Top speed | 160 km/h | 160 km/h | 160 km/h |
| Wheelbase | 3,750 mm | 3,750 mm | 3,750 mm |
| Length | 7,680 mm | 7,880 mm | 7,890 mm |
| Width | 2,200 mm | 2,250 mm | 2,250 mm |
| Unladen weight | 3,325 kg | 3,325 kg | 3,325 kg |
| Gross vehicle weight | 3,500 kg | 3,500 kg | 3,500 kg |
Models
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
30S12
The 30S12 comes from Cte. Production: 2021. The engine has 4 cylinders, with a displacement of 2,287 cm³. The...
Cte35S12no photo35S12
The Cte 35S12 is a machine built by Cte. Production: 2021-2024. The engine has 4 cylinders, with a displacement of...
Cte35S14no photo35S14
The 35S14 comes from Cte. Production: 2021-2022. The engine has 4 cylinders, with a displacement of 2,287 cm³. The...