Zremb PC130
Built: 2011-2011 · Series: Other models
More machines from model year 2011
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Zremb PC130 – EU class O4 trailer with a gross weight of 17,000 kg, a payload of 13,200 kg, a wheelbase of 7.0 m and four wheels for construction and municipal use
Zremb is a Polish manufacturer of trailers, semi-trailers and tipper bodies for construction and agriculture. With a gross weight of 17,000 kg, the PC130 belongs to the EU vehicle class O4, the heavy trailers above 10 tonnes.
Read on 3 more paragraphs
With an unladen weight of 3,800 kg, 13,200 kg of payload remain. A length of 9.6 m, a wheelbase of 7.0 m and four wheels add up to a compact two-axle chassis with comparatively short overhangs ahead of and behind the axles. At 2.55 m, the width uses the maximum vehicle width permitted in the EU.
As an O4-class vehicle, the PC130 needs an air brake system, and the towing vehicle must be built for the correspondingly high trailer load. Driving such a combination requires driving licence category C1E or CE, depending on the permissible combined weight. The strong ratio of payload to unladen weight and the compact dimensions point to use in construction or municipal transport, where manoeuvrability and high payload both matter.
For a used purchase, the air brake system comes first: lines, brake chambers and brake linings should be checked for wear and leaks. On a tipper chassis like this one, it is also worth checking the hydraulic rams and their seals, plus any deformation of the load bed from bulk material. The four wheels and their bearings should be checked for play, as should the frame and axle mounts for corrosion, especially after use on construction sites.
Sources: Kennwerte des Modells Zremb PC130
Technical data
Dimensions and weights
| Length | 9,600 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 7,000 mmcorrect |
| Unladen weight | 3,800 kgcorrect |
| Gross vehicle weight | 17,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Zremb PC130 weigh?
The unladen weight is 3,800 kg.
What is the gross vehicle weight of the Zremb PC130?
17,000 kg.
Up to what speed is the Zremb PC130 approved?
Approved up to 100 km/h.
What are the dimensions of the Zremb PC130?
9,600 mm × 2,550 mm.
When was the Zremb PC130 built?
Production years: 2011.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.