Zil ZIL-130
Built: 1962-2012 · Series: Truck
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The ZIL-130 belongs to the Truck series; it rolled off the line as a heavy truck in 1962-2012. The engine is rated at 20 kW. 2.9 L 177 C.I.D. 20 hp acted as the engine supplier.
Gearbox: 2-apeed planetary gear. The machine is 3.40 m long, 1.68 m wide and 1.86 m high. Unladen weight is 540 kg.
Technical data
Engine
| Engine | 2.9 L 177 C.I.D. 20 hpcorrect |
|---|---|
| Power | 20 hpcorrect |
Dimensions and weights
| Length | 3404 mm (134 in)correct |
|---|---|
| Width | 1676 mm (66 in)correct |
| Height | 1860 mm (73.2 in)correct |
| Wheelbase | 2540 mm (100 in)correct |
| Unladen weight | 540-750 kg (1200-1650 lb)correct |
Drivetrain and chassis
| Gearbox | 2-apeed planetary gearcorrect |
|---|
Where this model stands
Power-to-weight ratio: 37 kW/t (20 kW / 0.5 t)
Stronger than 0% of the trucks over 7.5 t in the register — out of 27,776 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Zil ZIL-130 have?
The Zil ZIL-130 delivers 20 kW.
When was the Zil ZIL-130 built?
Production years: 1962-2012.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.