Zegers DSW35
Built: 1987 · Series: Other models
More machines from model year 1987
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Zegers – other models: the collective page of trailers outside the named ranges, D3W 35, DSW 35, T13 and Z 2000, 0.34 to 1.15 t unladen weight, 1.3 to 3.5 t gross weight
This page gathers the Zegers trailers the register could not assign to a named range. The type designations D3W 35, DSW 35, T13 and Z 2000 are register entries; such letter-and-number combinations at smaller trailer makers usually denote axle configuration or build size, without forming a distinct, multiply represented model range.
Read on 3 more paragraphs
The register lists here 6 versions with unladen weights from 340 to 1,150 kg, gross weights from 1,300 to 3,500 kg and widths from 1,800 to 2,400 mm.
The whole collective page thus sits within class O2, the range of light car trailers, with an unladen-weight span of just over 800 kg between the lightest and heaviest recorded model – a sign of a range running from simple single-axle trailers to sturdier versions with a higher payload.
On a used trailer of this light class, the overrun brake with parking function matters, along with the condition of the axle bearings, the frame and load floor for rust, the side panels for distortion, the lighting harness and the tyres for ageing, since such trailers are often only used occasionally over the years. On the single-axle versions it is also worth checking the drawbar and its bearing, since play develops there first under infrequent use. The condition of the ball coupling or towing eye for ovalisation is also worth checking.
Sources: SpecCodex register, model data: Zegers (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,210 mmcorrect |
|---|---|
| Wheelbase | 4,080 mmcorrect |
| Unladen weight | 1,120 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Zegers DSW35 weigh?
The unladen weight is 1,120 kg.
What is the gross vehicle weight of the Zegers DSW35?
3,500 kg.
Up to what speed is the Zegers DSW35 approved?
Approved up to 100 km/h.
When was the Zegers DSW35 built?
Production years: 1987.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.