Start › Road construction › YTO › YZC12

YTO YZC12

Series: YTO Vibratory Smooth Drum Roller

The photo shows the LSD218H from the same series. Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The YTO YZC12 belongs to the YTO Vibratory Smooth Drum Roller series. The engine delivers 112.1 hp (82.5 kW). Rated speed is 2,300 rpm. The unladen weight is 12,000 kg. Ground clearance is 340.1 mm. Top speed is 13.8 km/h. The tank holds 220.3 litres. The hydraulic tank holds 150.3 litres. The electrical system runs on 12 V. The engine fitted is the F6L912. The YTO Vibratory Smooth Drum Roller series covers 8 models. Rated output within it ranges from 69.3 to 193.1 hp; the YZC12 sits in the lower part of that range with 112.1 hp. Its immediate neighbours are the YZC8 below it with 69.3 hp and the LSS218A above it with 179.6 hp. 82 YTO models across 12 series are on record. The model is listed under Road construction. 12 verified figures from 1 source are on file.

Technical data

Engine

Engine modelF6L912correct
Power112.1 hp (82.5 kW)correct
Rated speed2,300 rpmcorrect

Dimensions and weights

Width2,301.2correct
Ground clearance340.1correct
Unladen weight12,000 kgcorrect

Drivetrain and chassis

Top speed13.8 km/hcorrect
System voltage12 Vcorrect

Working data

Hydraulic oil capacity150.3 lcorrect
Fuel tank capacity220.3 lcorrect

Other data

Height2,923correct

Where this model stands

Power-to-weight ratio: 6.9 kW/t (82 kW / 12 t)

Stronger than 57% of the road construction in the register — out of 669 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the YTO YZC12 have?

The YTO YZC12 delivers 112 hp.

How much does the YTO YZC12 weigh?

The unladen weight is 12,000 kg.

How fast does the YTO YZC12 go?

Top speed is 13.8 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

LSD218H

LSD220H

LSS218A

LSS218PA

LSS220

YZ18F

YZC8

Sources: [1]

Asphalt paver in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare