Yanmar V4-7

Series: Yanmar Wheel Loader

Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Yanmar V4-7 is a model in the Yanmar Wheel Loader series. The engine delivers 41.6 hp (30.6 kW), has 4 cylinders, with a displacement of 2,189.3 cm³. Rated speed is 2,500 rpm. The unladen weight is 3,774.8 kg. The wheelbase measures 1,880.6 mm. Ground clearance is 371.9 mm. The pump delivers 56 l/min. The engine fitted is the 4TNV88C-NKAH. Tyre size: 15,5/60-18-8PR. The Yanmar Wheel Loader series covers 6 models. Rated output within it ranges from 30.6 to 41.6 hp; the V4-7 sits at the top of that range with 41.6 hp. Its immediate neighbours are the V4-6 below it with 41 hp. 1272 Yanmar models across 66 series are on record. The model is listed under Wheel loaders. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine model	4TNV88C-NKAHcorrect
Power	41.6 hp (30.6 kW)correct
Rated speed	2,500 rpmcorrect
Cylinders	4correct
Displacement	2,189.3 cm³correct
Aspiration	water-cooledcorrect

Dimensions and weights

Wheelbase	1,880.6correct
Ground clearance	371.9correct
Unladen weight	3,774.8 kgcorrect

Drivetrain and chassis

Gearbox type	automatic gearbox hydrostatic transmissioncorrect
Tyre size	15.5/60-18-8PRcorrect

Working data

Pump flow	56 l/mincorrect

Other data

Height	2,557.3correct

Where this model stands

Power-to-weight ratio: 8.1 kW/t (31 kW / 3.8 t)

Stronger than 4% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Yanmar V4-7 have?

The Yanmar V4-7 delivers 41.6 hp.

How much does the Yanmar V4-7 weigh?

The unladen weight is 3,775 kg.

What engine does the Yanmar V4-7 have?

4 cylinders, 2,189 cm³ displacement.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →