Yanmar T175-1

Series: Yanmar Multi Terrain Loader

Source: https://commons.wikimedia.org/wiki/Category:Yanmar_tracked_d

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the T175-1, Yanmar offers a model from the Yanmar Multi Terrain Loader series. The engine delivers 51 kW, has 4 cylinders, with a displacement of 3,326.6 cm³. The engine comes from Yanmar. The unladen weight is 3,903 kg. Ground clearance is 343.2 mm. The tank holds 92.4 litres. The hydraulic tank holds 41.6 litres. The cooling system holds 13.6 litres. The engine fitted is the 4TNV98C-NMSL. Rated output across the Yanmar range ranges from 3.4 to 155 kW; the T175-1 sits in the lower part of that range with 51 kW. Its immediate neighbours are the TL65RS-1C below it with 50 kW and the 4TNV98C above it with 51.7 kW. 1272 Yanmar models across 66 series are on record. The model is listed under Wheel loaders. 10 verified figures from 1 source are on file.

Technical data

Engine

Engine make	Yanmarcorrect
Engine model	4TNV98C-NMSLcorrect
Power	51 kWcorrect
Cylinders	4correct
Displacement	3,326.6 cm³correct
Coolant capacity	13.6 lcorrect

Dimensions and weights

Ground clearance	343.2correct
Unladen weight	3,903 kgcorrect

Working data

Hydraulic oil capacity	41.6 lcorrect
Fuel tank capacity	92.4 lcorrect

Where this model stands

Power-to-weight ratio: 13.1 kW/t (51 kW / 3.9 t)

Stronger than 19% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Yanmar T175-1 have?

The Yanmar T175-1 delivers 51 kW.

How much does the Yanmar T175-1 weigh?

The unladen weight is 3,903 kg.

What engine does the Yanmar T175-1 have?

4 cylinders, 3,327 cm³ displacement.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →