Start › Excavators & compaction › Yanmar › SV100

Yanmar SV100

Series: Yanmar Hydraulic Excavator

Source: https://www.technikboerse.com/gebraucht/bagger-789/yanmar-13

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Yanmar SV100 belongs to the Yanmar Hydraulic Excavator series. The engine delivers 74.5 hp (54.8 kW), has 4 cylinders, with a displacement of 3,400.3 cm³. Rated speed is 2,200 rpm. The unladen weight is 9,502.8 kg. Ground clearance is 451.1 mm. The tank holds 120 litres. The pump delivers 234.7 l/min. Working pressure is 275 bar. The engine fitted is the 4TNV98T-SBV. Rated output across the Yanmar range ranges from 10.4 to 90 hp; the SV100 sits in the upper part of that range with 74.5 hp. Its immediate neighbours are the SV100-2A below it with 73 hp and the T80n(narrow) above it with 79 hp. 1272 Yanmar models across 66 series are on record. The model is listed under Excavators & compaction. 12 verified figures from 1 source are on file.

Technical data

Engine

Engine model4TNV98T-SBVcorrect
Power74.5 hp (54.8 kW)correct
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement3,400.3 cm³correct

Dimensions and weights

Ground clearance451.1correct
Unladen weight9,502.8 kgcorrect

Working data

Pump flow234.7 l/mincorrect
Hydraulic pressure275 barcorrect
Fuel tank capacity120 lcorrect

Other data

Height2,831.6correct

Where this model stands

Power-to-weight ratio: 5.8 kW/t (55 kW / 9.5 t)

Stronger than 17% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Yanmar SV100 have?

The Yanmar SV100 delivers 74.5 hp.

How much does the Yanmar SV100 weigh?

The unladen weight is 9,503 kg.

What engine does the Yanmar SV100 have?

4 cylinders, 3,400 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare