Start › Backhoe loaders › Yanmar › CBL40

Yanmar CBL40

Series: Yanmar Loader Backhoe

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the CBL40, Yanmar offers a model from the Yanmar Loader Backhoe series. The engine delivers 37.7 hp (26.4 kW). The wheelbase measures 1,752.6 mm. Ground clearance is 323.1 mm. The tank holds 62.1 litres. The gearbox has 2 forward gears. There are also 2 reverse gears. The pump delivers 42 l/min. Working pressure is 206.8 bar. Rated output across the Yanmar range ranges from 10.4 to 90 hp; the CBL40 sits in the lower part of that range with 37.7 hp. Its immediate neighbours are the EF235H below it with 35.4 hp and the Vio45-5 above it with 39.2 hp. 1272 Yanmar models across 66 series are on record. The model is listed under Wheel loaders. 11 verified figures from 1 source are on file.

Technical data

Engine

Power	37.7 hp (26.4 kW)correct
Aspiration	turbochargedcorrect

Dimensions and weights

Wheelbase	1,752.6correct
Ground clearance	323.1correct

Drivetrain and chassis

Gearbox type	mechanical gearboxly controlled load sensing HMTcorrect
Forward gears	2correct
Reverse gears	2correct

Working data

Pump flow	42 l/mincorrect
Hydraulic pressure	206.8correct
Fuel tank capacity	62.1 lcorrect

Frequently asked questions

How much power does the Yanmar CBL40 have?

The Yanmar CBL40 delivers 37.7 hp.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Wheeled excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.