Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Wp › WP-2100/125

Wp WP-2100/125

Built: 1973 · Series: Other models

More machines from model year 1973

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The WP-2100/125 comes from Wp. Production: 1973. The machine is 12,400 mm long and 2,500 mm wide. The unladen weight is 7,540 kg. The gross vehicle weight is 20,000 kg. Unladen weight within this group ranges from 85 to 84,800 kg; the WP-2100/125 sits at the bottom of that range with 7,540 kg. Its immediate neighbours are the EO.100Z.12 below it with 7,532 kg and the SKO24/L-13.62 FP25EXPR.2 above it with 7,541 kg. Gross vehicle weight within this group ranges from 470 to 722,500 kg; here the WP-2100/125 sits at the bottom of that range with 20,000 kg.

Wp WP-2100/125 - trailer of EU class O4: 20,000 kg gross weight, 7,540 kg unladen weight, 12,400x2,500 mm, built 1973, width 2,500 mm.

With a gross weight of 20,000 kg, the WP-2100/125 from Wp belongs to the EU trailer class O4 (above 10,000 kg gross weight), the heavy trailers and semi-trailers towed behind tractor units or heavy trucks in long-haul and heavy-transport work. Year of manufacture 1973. Trailers in this class need a compressed-air brake system.

Read on 3 more paragraphs

With an unladen weight of 7,540 kg, that leaves a payload of 12,460 kg. The dimensions are 12,400 mm in length and 2,500 mm in width.

Fifth-wheel or drawbar load and the design of the coupling decide which tractor unit suits a trailer like this. At this weight class the trailer is built for long-haul or heavy and abnormal-load work, not for occasional private use.

On a viewing, the brake cylinders, lines and the air system's tightness are among the first points to check. Tyres and rims should be checked for age and even wear, especially if the trailer has stood unused for a while. On bodies with tarpaulins or side boards, the condition often only shows up on close inspection for leaks and deformation. Paperwork and the validity of the roadworthiness test belong to every viewing. The brake system and brake lines deserve particular attention, as this is an area often neglected in everyday use. With several axles, a test drive is a good chance to compare braking effect between axles.

Sources: SpecCodex-Register: Kennwerte des Modells Wp WP-2100/125

Technical data

Dimensions and weights

Length12,400 mmcorrect
Width2,500 mmcorrect
Unladen weight7,540 kgcorrect
Gross vehicle weight20,000 kgcorrect

Frequently asked questions

How much does the Wp WP-2100/125 weigh?

The unladen weight is 7,540 kg.

What is the gross vehicle weight of the Wp WP-2100/125?

20,000 kg.

What are the dimensions of the Wp WP-2100/125?

12,400 mm × 2,500 mm.

When was the Wp WP-2100/125 built?

Production years: 1973.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare