StartCold planersWirtgen › W150

Wirtgen W150

Series: Wirtgen Cold Planer

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Wirtgen W150 is a model in the Wirtgen Cold Planer series. The engine delivers 375.1 hp (261 kW), has 6 cylinders, with a displacement of 8,901.5 cm³. Rated speed is 2,100 rpm. The tank holds 810.1 litres. The hydraulic tank holds 120.4 litres. The engine fitted is the QSL9. The Wirtgen Cold Planer series covers 8 models. Rated output within it ranges from 210.9 to 963.2 hp; the W150 sits in the lower part of that range with 375.1 hp. Its immediate neighbours are the W130F below it with 308.2 hp and the W1900 above it with 475.5 hp. 8 Wirtgen models are on record. The model is listed under Road construction. 8 verified figures from 1 source are on file.

Technical data

Engine

Engine modelQSL9correct
Power375.1 hp (261 kW)correct
Rated speed2,100 rpmcorrect
Cylinders6correct
Displacement8,901.5 cm³correct

Working data

Hydraulic oil capacity120.4 lcorrect
Fuel tank capacity810.1 lcorrect

Frequently asked questions

How much power does the Wirtgen W150 have?

The Wirtgen W150 delivers 375 hp.

What engine does the Wirtgen W150 have?

6 cylinders, 8,902 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Asphalt paver in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare