Westward M100
Series: Westward Swather
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Westward Swather – Canadian windrowers: 9250 SP to M200, four- to six-cylinder engines, 3,300 to 6,604 cm³ displacement, 2,200 to 2,600 rpm
Westward is a Canadian maker of self-propelled windrowers. This page gathers the 9250 SP, 9352C, M100, M150 and M200 types. As with other windrowers, the machine carries a cutting header at the front and lays the cut crop in a windrow to dry before it is picked up by a baler or a combine with a pick-up header.
Read on 3 more paragraphs
The register lists here 5 versions with four- to six-cylinder diesel engines of 3,300 to 6,604 cm³ displacement and rated speeds of 2,200 to 2,600 rpm.
Self-propelled windrowers such as the Westward range are common above all in the large-scale arable regions of Canada and the northern United States, where grain, oilseed rape and lucerne are cut on large fields within short harvest windows and laid to dry in the windrow before moisture or frost reduce grain quality. As with other North American windrowers, the front-mounted header can be swapped for platforms of different cutting widths depending on the crop.
When buying used, what counts is the condition of the header and the conditioning rollers, the hydraulics for height and tilt control, the engine and transmission after the high annual hours of seasonal use, and rust on the cab and frame. The condition of the drive belts and chains on the header drive is also worth checking before purchase; wear parts such as knives, knife holders and belts are consumables in ongoing harvest operation.
Technical data
Engine
| Rated speed | 2,600 rpmcorrect |
|---|---|
| Cylinders | 4correct |
| Displacement | 3,300.4 cm³correct |
| Aspiration | Turbochargecorrect |
Dimensions and weights
| Ground clearance | 1,160correct |
|---|
Drivetrain and chassis
| Gearbox type | hydrostatic transmission, 2 speedcorrect |
|---|---|
| Top speed | 25.7 km/hcorrect |
Working data
| Fuel tank capacity | 367.2 lcorrect |
|---|
Other data
| System voltage | 12 Vcorrect |
|---|
Frequently asked questions
What engine does the Westward M100 have?
4 cylinders, 3,300 cm³ displacement.
How fast does the Westward M100 go?
Top speed is 25.7 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.