Welger AP530
Series: Quader-/Hochdruckpresse / Square baler
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Dimensions and weights
| Length | 4,650 mmcorrect |
|---|---|
| Height | 1,630 mmcorrect |
| Unladen weight | 1,700 kgcorrect |
Working data
| Number of tines | 105correct |
|---|---|
| Twine rolls | 8correct |
| Number of knife bars | 5correct |
| Max. bale weight | 35 kgcorrect |
Other data
| Ballengewicht min kg | 12 kgcorrect |
|---|
Frequently asked questions
How much does the Welger AP530 weigh?
The unladen weight is 1,700 kg.
What are the dimensions of the Welger AP530?
4,650 mm × 1,630 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · lectura-specs.com (retrieved August 2026) · How we check the data
Round baler in 3D section
Turn the model, look inside and click an assembly — each one is explained.
