Start › Wheel loaders › Wacker Neuson › ST28

Wacker Neuson ST28

Series: Wacker Neuson Multi Terrain Loader

Source: http://www.mascus.com.tw/construction/%B6%FE%CA%D6-%BB%AC%D2

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the ST28, Wacker Neuson offers a model from the Wacker Neuson Multi Terrain Loader series. The engine delivers 75 hp (55.2 kW), with a displacement of 2,482.6 cm³. The engine comes from Kohler. Rated speed is 2,750 rpm. The unladen weight is 3,551.2 kg. Ground clearance is 231.1 mm. The tank holds 113.6 litres. Working pressure is 241.3 bar. The engine fitted is the KDI 2504 TCR. The Wacker Neuson Multi Terrain Loader series covers 4 models. Rated output within it ranges from 75 to 75.3 hp; the ST28 sits at the bottom of that range with 75 hp. Its immediate neighbours are the ST35 above it with 75.3 hp. 50 Wacker Neuson models across 9 series are on record. The model is listed under Wheel loaders. 11 verified figures from 1 source are on file.

Technical data

Engine

Engine makeKohlercorrect
Engine modelKDI 2504 TCRcorrect
Power75 hp (55.2 kW)correct
Rated speed2,750 rpmcorrect
Displacement2,482.6 cm³correct

Dimensions and weights

Ground clearance231.1correct
Unladen weight3,551.2 kgcorrect

Working data

Hydraulic pressure241.3correct
Fuel tank capacity113.6 lcorrect

Other data

Height2,109.2correct

Where this model stands

Power-to-weight ratio: 15.5 kW/t (55 kW / 3.6 t)

Stronger than 24% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Wacker Neuson ST28 have?

The Wacker Neuson ST28 delivers 75 hp.

How much does the Wacker Neuson ST28 weigh?

The unladen weight is 3,551 kg.

What engine does the Wacker Neuson ST28 have?

2,483 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

ST31

ST35

ST45

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare