Start › Excavators & compaction › Wacker Neuson › ET90

Wacker Neuson ET90

Series: Wacker Neuson Midi Excavator

Source: https://commons.wikimedia.org/w/index.php?curid=169032790 u

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Wacker Neuson ET90 belongs to the Wacker Neuson Midi Excavator series. The engine delivers 74.7 hp (55 kW), has 4 cylinders, with a displacement of 2,918.5 cm³. The engine comes from Deutz. Rated speed is 1,850 rpm. The unladen weight is 9,988.1 kg. Ground clearance is 371.9 mm. The tank holds 85.2 litres. The pump delivers 175.6 l/min. The hydraulic tank holds 92 litres. Working pressure is 300 bar. The engine fitted is the TCD 2,9 DOC. The Wacker Neuson Midi Excavator series covers 4 models. Rated output within it ranges from 17.4 to 74.7 hp; the ET90 sits at the top of that range with 74.7 hp. Its immediate neighbours are the ET65 below it with 59.4 hp. 50 Wacker Neuson models across 9 series are on record. The model is listed under Excavators & compaction. 15 verified figures from 1 source are on file.

Technical data

Engine

Engine makeDeutzcorrect
Engine modelTCD 2.9 DOCcorrect
Power74.7 hp (55 kW)correct
Rated speed1,850 rpmcorrect
Cylinders4correct
Displacement2,918.5 cm³correct
AspirationLiquid-cooledcorrect

Dimensions and weights

Ground clearance371.9correct
Unladen weight9,988.1 kgcorrect

Working data

Pump flow175.6 l/mincorrect
Hydraulic oil capacity92 lcorrect
Hydraulic pressure300 barcorrect
Fuel tank capacity85.2 lcorrect

Other data

Height2,563.4correct

Where this model stands

Power-to-weight ratio: 5.5 kW/t (55 kW / 10 t)

Stronger than 17% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Wacker Neuson ET90 have?

The Wacker Neuson ET90 delivers 74.7 hp.

How much does the Wacker Neuson ET90 weigh?

The unladen weight is 9,988 kg.

What engine does the Wacker Neuson ET90 have?

4 cylinders, 2,918 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Used equipment offers
1 current listings for Wacker Neuson ET90 on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

ET16

ET20

ET65

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare