Wacker Neuson 50Z3

Series: Wacker Neuson Mini Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the 50Z3, Wacker Neuson offers a model from the Wacker Neuson Mini Excavator series. The engine delivers 48.8 hp (35.9 kW), has 4 cylinders. Ground clearance is 307.8 mm. The tank holds 83.3 litres. The pump delivers 166.6 l/min. The hydraulic tank holds 80.3 litres. Working pressure is 240 bar. The electrical system runs on 12 V. The engine fitted is the 4TNV98. The Wacker Neuson Mini Excavator series covers 11 models. Rated output within it ranges from 15.6 to 70.5 hp; the 50Z3 sits in the upper part of that range with 48.8 hp. Its immediate neighbours are the 3503 below it with 40.6 hp and the EZ53 above it with 59.7 hp. 50 Wacker Neuson models across 9 series are on record. The model is listed under Excavators & compaction. 11 verified figures from 1 source are on file.

Technical data

Engine

Engine model4TNV98correct
Power48.8 hp (35.9 kW)correct
Cylinders4correct

Dimensions and weights

Ground clearance307.8correct

Drivetrain and chassis

System voltage12 Vcorrect

Working data

Pump flow166.6 l/mincorrect
Hydraulic oil capacity80.3 lcorrect
Hydraulic pressure240 barcorrect
Fuel tank capacity83.3 lcorrect

Other data

Height2,572.5correct

Frequently asked questions

How much power does the Wacker Neuson 50Z3 have?

The Wacker Neuson 50Z3 delivers 48.8 hp.

What engine does the Wacker Neuson 50Z3 have?

4 cylinders.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Mini excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare