Vw/lamar CRAFTER
Built: 2018-2018 · Series: Other models
More machines from model year 2018
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
VW/Lamar – other models: the collective page of vans with special bodywork outside the named ranges, Bus and Crafter, 2,500 to 3,500 kg gross weight, 1,888 to 1,968 cc displacement
This page gathers vehicles on a Volkswagen chassis listed in the register with bodywork by Lamar, without assignment to a named range – alongside the base type Crafter, the general designation Bus stands here for a further vehicle on a VW base. Such combinations of a VW chassis with bodywork from a third party are often listed in registration records under the bodybuilder's name alongside the base marque.
Read on 3 more paragraphs
The register lists here 2 versions with a displacement of 1,888 to 1,968 cc, 4 cylinders, unladen weights from 1,600 to 2,415 kg, gross weights from 2,500 to 3,500 kg and widths from 1,850 to 2,280 mm.
With gross weights of 2.5 to 3.5 tonnes, both versions fall into vehicle category N1, the light commercial vehicle segment; the span from a more compact Bus-based vehicle to the larger Crafter shows how varied special bodywork on the VW range can be. The designation Bus refers to the VW van chassis regardless of the specific bodywork fitted; in both cases the drivetrain and running gear come from the base VW vehicle.
On a used example, besides the usual points such as the turbocharger, dual-mass flywheel and the condition of the diesel particulate filter, on units with special bodywork the tightness and condition of the body, the function of any additional wiring fitted, and corrosion at the mounting points between chassis and body all matter. Parts for the chassis drivetrain run through the VW commercial-vehicle trade.
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,968 cm³correct |
Dimensions and weights
| Width | 2,280 mmcorrect |
|---|---|
| Wheelbase | 4,490 mmcorrect |
| Unladen weight | 2,415 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Vw/lamar CRAFTER weigh?
The unladen weight is 2,415 kg.
What is the gross vehicle weight of the Vw/lamar CRAFTER?
3,500 kg.
What engine does the Vw/lamar CRAFTER have?
4 cylinders, 1,968 cm³ displacement.
When was the Vw/lamar CRAFTER built?
Production years: 2018.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.