Volvo FL 260
Built: 2011-2013 · Series: FL
More machines from model year 2011
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Volvo FL — low cab, light class, short runs
FL stands for forward control low: forward-control truck with a low cab. It is the lightest and lowest member of the Volvo range and thus the counterpart to the FH. The FL works where many stops fall each day and where height and manoeuvrability decide usability — city traffic, delivery, municipal services, fire brigades.
Read on 4 more paragraphs
The low entry is the actual point. At fifty stops a day every step adds up to real working time and strain. Anyone looking for a distribution vehicle should weigh this above engine output; in city traffic the power is rarely used, but the entry is used a hundred times over.
The FL covers the lighter segment, below the FM and FH. The exact gross vehicle weight is not in the designation — it depends on axles and body and must be taken from the papers. Two vehicles, both FL, can fall into different licence classes.
Alongside the FL there is the FE, also in the light-to-medium range, with a different cab and a different layout. Anyone searching the used market should look at both; the application profiles overlap heavily, and prices often differ more by body than by chassis.
When buying used in this class, history counts especially. Delivery vehicles have few kilometres but very many operating hours and cold starts. A low odometer reading is no proof of a gently used vehicle here.
Sources: Volvo FL (Wikipedia), Volvo FM (Wikipedia)
Technical data
Engine
| Power | 188 kWcorrect |
|---|---|
| Cylinders | 6correct |
| Displacement | 7,146 cm³correct |
Dimensions and weights
| Length | 8,700 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 4,400 mmcorrect |
| Unladen weight | 6,220 kgcorrect |
| Gross vehicle weight | 11,990 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Where this model stands
Power-to-weight ratio: 30.2 kW/t (188 kW / 6.2 t)
Stronger than 28% of the trucks over 7.5 t in the register — out of 25,424 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Volvo FL 260 have?
The Volvo FL 260 delivers 188 kW.
How much does the Volvo FL 260 weigh?
The unladen weight is 6,220 kg.
What is the gross vehicle weight of the Volvo FL 260?
11,990 kg.
What engine does the Volvo FL 260 have?
6 cylinders, 7,146 cm³ displacement.
What are the dimensions of the Volvo FL 260?
8,700 mm × 2,550 mm.
When was the Volvo FL 260 built?
Production years: 2011-2013.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
10 4X4
10 6X2
10 6X4
10 8X2
10 H 4X2
10-35-6X2
10-42R-75S
10-42T-67S
10-440-6X2/380+135
10-4X2
10-4X2 L-71 L
10-4X2-BK
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.