Technical register for agricultural, construction and commercial machinery · sourced data
Start › Harvesting machinery › Vassalli › Pluma

Vassalli Pluma

Built: 1960-1960 · Series: Other models

More machines from model year 1960

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Pluma comes from Vassalli. Production: 1960. The engine delivers 77.6 hp (57.9 kW), has 4 cylinders. The engine comes from IKA Continental. The model was built in Firmat, Santa Fe, Argentina. The fuel is gas. The engine fitted is the 4-151. The gearbox offers 3 forward gears. There are also 1 reverse gears. Rated output across the Vassalli range ranges from 77.6 to 284 hp; the Pluma sits at the bottom of that range with 77.6 hp. Its immediate neighbours are the 900 above it with 100 hp. Rated output across the Vassalli range ranges from 57.9 to 212 kW; here the Pluma sits at the bottom of that range with 57.9 kW. 29 Vassalli models across 2 series are on record.

Vassalli – other models: Argentine combine harvesters outside the named ranges, from the 900 Lider through the 1500 M/H to the Super Arrocera P13, 58 to 212 kW, Cummins, Deutz and Perkins engines

This page gathers the Vassalli combine harvesters the register could not assign to a named range. Vassalli Fabril is a family company from Firmat in the Argentine province of Santa Fe and one of the leading South American makers of combine harvesters. The type logic of the models: the three-digit base types such as 900 and 960 denote earlier development stages, the suffix Lider and Super mark upgraded equipment variants, M/H distinguishes versions for maize (maíz) and sorghum or grain, the Super Arrocera P13 is a version designed specifically for wet rice (arroz) cultivation, with chassis and threshing mechanism adapted accordingly. The engines come mainly from international suppliers – Cummins, Deutz, Perkins and Volvo Penta – as well as from IKA Continental, the Continental engine built under licence in Argentina.

Read on 3 more paragraphs

The register lists here 23 versions with 57.9 to 212 kW, that is 77.6 to 284 hp, from four- to six-cylinders; the engines are overwhelmingly diesel, with a few petrol examples.

Alongside John Deere, Case IH and New Holland, Vassalli is one of the few makers that develop and build complete combine harvesters in South America, with a focus on Argentina's Pampas region and exports to Brazil, Uruguay and Paraguay; the special versions for rice and maize reflect the diversity of South American cropping systems.

On used machines, operating hours and the condition of the threshing mechanism (concave, drum, sieves), the condition of the chopper and straw walkers, the tightness of the hydraulics, the condition of the supplier engine, and, on the rice versions, the condition of the chassis adapted to flooded fields count; parts run through the Vassalli network in Argentina and neighbouring countries.

Sources: Kennwerte der Modelle Vassalli (weitere Modelle), Vassalli Fabril (Hersteller)

Technical data

Engine

Engine makeIKA Continentalcorrect
Engine model4-151correct
Fuelgascorrect
Power77.6 hp (57.9 kW)correct
Cylinders4correct
Turbochargernocorrect

Drivetrain and chassis

Forward gears3correct
Reverse gears1correct
Clutchdrycorrect

Origin and approval

PlantFirmat, Santa Fe, Argentinacorrect

Frequently asked questions

How much power does the Vassalli Pluma have?

The Vassalli Pluma delivers 77.6 hp.

What engine does the Vassalli Pluma have?

4 cylinders, gas.

When was the Vassalli Pluma built?

Production years: 1960.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare