Van Hool 2-ASSIGE OPLEGGER
Built: 2013-2024 · Series: Trailers over 10 t (Class O4)
More machines from model year 2013
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Van Hool trailers over 10 t (Class O4) – the Belgian bus and commercial-vehicle builder from Koningshooikt with its own trailer production: 426 versions with curtainsider and tanker bodies, gross weights up to 50 t
Class O4 groups, according to registration data from the Netherlands and Finland, all trailers with a permissible gross weight over 10 tonnes. Van Hool of Koningshooikt near Lier is best known as a Belgian bus and coach builder (founded in 1947 by Bernard Van Hool), but for decades also ran its own division for commercial-vehicle bodies and semi-trailers, mostly curtainsiders and tankers. The company underwent a financial restructuring in 2024 in which parts of the business were sold; how the trailer production is organised today cannot be inferred from the register data alone.
Read on 3 more paragraphs
The register lists 426 versions with unladen weights of 2,320 to 37,740 kg and permissible gross weights of 15,000 to 50,000 kg. Lengths are recorded for 303 of the 426 models, ranging from 1,624 to 14,130 mm, and width for all 426 from 260 to 2,700 mm.
As a trailer builder alongside its core bus and coach business, Van Hool was present in Belgium and the Benelux countries, but remained a smaller player in the European semi-trailer market against the leaders Schmitz Cargobull and Krone.
On used trailers, what counts is the condition of the axles (BPW/SAF) and EBS braking system, air suspension, frame corrosion, the kingpin and landing legs; on tankers, additionally the tightness and inspection certificates of the tank; on curtainsiders, the condition of the curtain and roof bows; given the maker's restructuring that began in 2024, it is also worth asking about current parts and service supply.
Sources: Kennwerte der Modelle Van Hool Anhänger über 10 t (Klasse O4), Van Hool (Hersteller)
Technical data
Dimensions and weights
| Length | 14,130 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,410 mmcorrect |
| Unladen weight | 26,920 kgcorrect |
| Gross vehicle weight | 36,000 kgcorrect |
Drivetrain and chassis
| Wheels | 8correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Van Hool 2-ASSIGE OPLEGGER weigh?
The unladen weight is 26,920 kg.
What is the gross vehicle weight of the Van Hool 2-ASSIGE OPLEGGER?
36,000 kg.
Up to what speed is the Van Hool 2-ASSIGE OPLEGGER approved?
Approved up to 100 km/h.
What are the dimensions of the Van Hool 2-ASSIGE OPLEGGER?
14,130 mm × 2,550 mm.
When was the Van Hool 2-ASSIGE OPLEGGER built?
Production years: 2013-2024.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.