Valtra Eicher 3300 V
Built: 2007-2007 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Built in 2007, the Valtra Eicher 3300 V is a tractor from Valtra. Engine output is 45 kW.
Drive type: MFWD.
It runs on diesel; the engine is air-cooled. Within the range, rated power spans from 9.7 to 313 kW; with 45 kW, the Eicher 3300 V sits at the bottom end. Directly alongside are the 585C with 37 kW below and the A65 with 47 kW above.
Technical data
Engine
| Engine make | Deutzcorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 60 hp (45 kW)correct |
| Cooling | air-cooledcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|
Frequently asked questions
How much power does the Valtra Eicher 3300 V have?
The Valtra Eicher 3300 V delivers 60 hp.
When was the Valtra Eicher 3300 V built?
Production years: 2007.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.