Valtra C 110
Built: 2006-2006 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Built in 2006, the Valtra C 110 is a tractor from Valtra. Under the bonnet works a four-cylinder engine displacing 4.4 litres, producing 84 kW.
Drive type: MFWD. Dimensions are 4.43 m by 2.50 m. Unladen weight is 5,270 kg.
It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 9.7 to 313 kW; with 84 kW, the C 110 sits in the lower third. Directly alongside are the G105 with 83 kW below and the T 120-4-4X4/275 with 84.5 kW above.
Technical data
Engine
| Engine make | SISUcorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 110 hp (84 kW)correct |
| Cylinders | 4correct |
| Displacement | 4,399 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,430 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Unladen weight | 5,270 kgcorrect |
| Gross vehicle weight | 12,000 kgcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|
Origin and approval
| Plant | Finlandcorrect |
|---|
Where this model stands
Power-to-weight ratio: 15.9 kW/t (84 kW / 5.3 t)
Power class: Large (100–180 hp)
Stronger than 73% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Valtra C 110 have?
The Valtra C 110 delivers 110 hp.
How much does the Valtra C 110 weigh?
The unladen weight is 5,270 kg.
What is the gross vehicle weight of the Valtra C 110?
12,000 kg.
What engine does the Valtra C 110 have?
4 cylinders, 4,399 cm³ displacement, Diesel.
What are the dimensions of the Valtra C 110?
4,430 mm × 2,500 mm.
When was the Valtra C 110 built?
Production years: 2006.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.