Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Valtra › 8350 HI-TECH

Valtra 8350 HI-TECH

Built: 2001-2001 · Series: Other models

More machines from model year 2001

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 8350 HI-TECH comes from Valtra. Production: 2001. The engine delivers 99 kW, has 6 cylinders, with a displacement of 6,590 cm³. The machine is 4,950 mm long and 2,470 mm wide. The unladen weight is 9,000 kg. Rated output across the Valtra range ranges from 9.7 to 313 kW; the 8350 HI-TECH sits in the lower part of that range with 99 kW. Its immediate neighbours are the T121h below it with 98 kW and the Advance N121 above it with 99.2 kW. Unladen weight across the Valtra range ranges from 680 to 12,000 kg; here the 8350 HI-TECH sits in the upper part of that range with 9,000 kg. 782 Valtra models across 32 series are on record.

Valtra – other models: the collective page of the Finnish tractors outside the named ranges, from the Valmet 600 and 6000 series to A, N, T and S, 10 to 313 kW, Sisu and AGCO Power engines from Linnavuori

This page gathers the Valtra tractors the register could not assign to a named range – the brand from Suolahti in central Finland that, as Valmet with state roots, built the first Finnish tractor in 1951, was renamed Valtra in 1997 after the sale to Sisu and has belonged to AGCO since 2004. The type logic: the Valmet ranges of the 1980s and 1990s – 500, 600, 6000 (Mezzo) and 8000 (Mega) – give the range in the first digit, -4 four-wheel drive and HiTech the equipment with electronic control; since 2000 Valtra has structured the programme in letter ranges, A for the compact class, N for the four-cylinders, T for the six-cylinders and S for the big tractors, with the following number as power class (N174 about 175 hp, T234 about 235 hp) and the suffixes HiTech, Active, Versu and Direct for transmission and equipment. The engines come from the company's own Linnavuori plant – first Valmet, then Sisu, today AGCO Power – three- to six-cylinders of 3.3 to 8.4 litres; the brand is known for the à-la-carte tractor the customer configures at the factory in colour and equipment, and for the forestry and municipal versions with the TwinTrac reverse-drive station.

Read on 3 more paragraphs

The register lists here 646 versions with 9.7 to 313 kW from one- to six-cylinders of 400 to 8,419 cm³, unladen weights from 680 to 12,000 kg, gross weights from 1,100 to 16,000 kg, lengths from 2,970 to 6,090 mm and widths from 1,362 to 3,000 mm.

Valtra is market leader in Finland and Scandinavia and one of the big brands in Brazil, where AGCO runs a second Valtra plant; in Central Europe it is the tractor of forestry businesses and municipalities.

On used tractors, operating hours, Sisu engine and injection, HiShift shuttle and powershift (Versu) or stepless transmission (Direct), TwinTrac station, front loader and forestry equipment, rust on cab and mudguards count; parts run through Valtra and AGCO.

Sources: Kennwerte der Modelle Valtra (weitere Modelle), Valtra (AGCO, Hersteller)

Technical data

Engine

Power99 kWcorrect
Cylinders6correct
Displacement6,590 cm³correct

Dimensions and weights

Length4,950 mmcorrect
Width2,470 mmcorrect
Unladen weight9,000 kgcorrect

Where this model stands

Power-to-weight ratio: 11 kW/t (99 kW / 9 t)

Power class: Large (100–180 hp)

Stronger than 79% of the tractors in the register — out of 15,650 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Valtra 8350 HI-TECH have?

The Valtra 8350 HI-TECH delivers 99 kW.

How much does the Valtra 8350 HI-TECH weigh?

The unladen weight is 9,000 kg.

What engine does the Valtra 8350 HI-TECH have?

6 cylinders, 6,590 cm³ displacement.

What are the dimensions of the Valtra 8350 HI-TECH?

4,950 mm × 2,470 mm.

When was the Valtra 8350 HI-TECH built?

Production years: 2001.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare