StartTractorsTortone › A-155

Tortone A-155

Series: Other models

The photo shows the F-125 from the same series. Source: https://www.technikboerse.com/ru/haendler/agrotech-49011804

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Tortone A-155 is a tractor made by Tortone. It is powered by a six-cylinder engine producing 116 kW.

It runs on diesel; the engine is air-cooled. Within the range, rated power spans from 89 to 140 kW; with 116 kW, the A-155 sits in the mid-field. Directly alongside are the F-125 with 93 kW below and the Taurus 185 with 138 kW above.

Technical data

Engine

Engine makeDeutzcorrect
Engine modelBF6L913correct
Fueldieselcorrect
Power155 hp (116 kW)correct
Cylinders6correct
Coolingair-cooledcorrect

Drivetrain and chassis

Drivefour-wheel driveWDcorrect
Gearbox makeZFcorrect
Forward gears3correct
Reverse gears3correct

Origin and approval

PlantCórdoba, Argentinacorrect

Frequently asked questions

How much power does the Tortone A-155 have?

The Tortone A-155 delivers 155 hp.

What engine does the Tortone A-155 have?

6 cylinders, Diesel.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare