Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Shears & pulverisers › TOKU › GS-202

TOKU GS-202

Series: GS

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TOKU GS-202 is part of the Shears & pulverisers category from TOKU. It is a shear or pulveriser used to cut and crush reinforced concrete and steel. The equipment type is Scrap shear. It fits carrier machines from 20 to 22 tonnes operating weight. The unladen weight is 2,460 kg. The figures come from the manufacturer's data sheet and describe the base configuration; other equipment variants are possible. Unladen weight across the TOKU range ranges from 60 to 6,880 kg; the GS-202 sits in the lower part of that range with 2,460 kg. Its immediate neighbours are the D-212 below it with 2,330 kg and the GT-400 above it with 2,470 kg. 107 TOKU models across 19 series are on record. The model is listed under Shears & pulverisers. 4 verified figures from 2 sources are on file.

Technical data

Dimensions and weights

Unladen weight2,460correct

Other data

Carrier max.22correct
Carrier min.20correct

Frequently asked questions

How much does the TOKU GS-202 weigh?

The unladen weight is 2,460 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 4 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1] [2]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare