Start › Screening & crusher buckets › TOKU › D-1052

TOKU D-1052

Series: D

The photo shows the D-482 from the same series. Source: https://toku.co.id/produk/toku-air-tool/mi-1311b/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TOKU D-1052 is part of the Screening & crusher buckets category from TOKU. It is a screening or crusher bucket used to screen, separate and crush bulk material. The equipment type is Primary crusher. It fits carrier machines from 100 to 100 tonnes operating weight. The unladen weight is 5,610 kg. The figures come from the manufacturer's data sheet and describe the base configuration; other equipment variants are possible. The D series covers 16 models. Unladen weight within it ranges from 240 to 6,880 kg; the D-1052 sits in the upper part of that range with 5,610 kg. Its immediate neighbours are the D-452 below it with 5,090 kg and the D-482 above it with 6,070 kg. 107 TOKU models across 19 series are on record. The model is listed under Screening & crusher buckets. 4 verified figures from 2 sources are on file.

Technical data

Dimensions and weights

Unladen weight5,610correct

Other data

Carrier max.100correct
Carrier min.100correct

Frequently asked questions

How much does the TOKU D-1052 weigh?

The unladen weight is 5,610 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 4 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

D-1082

D-1092

D-122

D-135

D-202

D-212

D-352

D-36

D-412

D-42N

D-452

D-482

Sources: [1] [2]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare