Tigercat 718E
Series: Tigercat Feller Buncher
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | QSB6.7 Tier IIIcorrect |
|---|---|
| Power | 175.4 hp (129 kW)correct |
| Rated speed | 2,200 rpmcorrect |
Dimensions and weights
| Length | 5,410.2correct |
|---|---|
| Width | 2,542correct |
| Wheelbase | 2,746.2correct |
| Ground clearance | 427correct |
Drivetrain and chassis
| Gearbox type | hydrostatic transmission 2-speed mechanical gearbox shiftcorrect |
|---|---|
| Tyre size | 23.1 x 26correct |
| System voltage | 24 Vcorrect |
Working data
| Hydraulic oil capacity | 147.3 lcorrect |
|---|---|
| Fuel tank capacity | 314.2 lcorrect |
Other data
| Height | 3,352.8correct |
|---|
Frequently asked questions
How much power does the Tigercat 718E have?
The Tigercat 718E delivers 175 hp.
What are the dimensions of the Tigercat 718E?
5,410 mm × 2,542 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forwarder in 3D section
Turn the model, look inside and click an assembly — each one is explained.