Terex TX6622
Series: Terex Telescopic Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Power | 81.6 hp (60 kW)correct |
|---|---|
| Rated speed | 2,600 rpmcorrect |
| Cylinders | 4correct |
Dimensions and weights
| Length | 4,721.4correct |
|---|---|
| Width | 1,941.6correct |
| Wheelbase | 2,670correct |
| Ground clearance | 402.3correct |
| Unladen weight | 6,000 kgcorrect |
Drivetrain and chassis
| Gearbox type | hydrostatic transmission closed circuit, continuous speed regulationcorrect |
|---|---|
| Forward gears | 2correct |
| Tyre size | 400/70-20 (405/70-24correct |
Working data
| Pump flow | 79.1 l/mincorrect |
|---|---|
| Hydraulic oil capacity | 105.2 lcorrect |
| Hydraulic pressure | 269.9correct |
| Fuel tank capacity | 92.4 lcorrect |
Where this model stands
Power-to-weight ratio: 10 kW/t (60 kW / 6 t)
Stronger than 17% of the telehandlers in the register — out of 658 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Terex TX6622 have?
The Terex TX6622 delivers 81.6 hp.
How much does the Terex TX6622 weigh?
The unladen weight is 6,000 kg.
What engine does the Terex TX6622 have?
4 cylinders.
What are the dimensions of the Terex TX6622?
4,721 mm × 1,942 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Telehandler in 3D section
Turn the model, look inside and click an assembly — each one is explained.