StartTelehandlersTerex › TH1048C

Terex TH1048C

Series: Terex Telescopic Forklift

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Terex TH1048C is a model in the Terex Telescopic Forklift series. The engine delivers 116.6 hp (85.8 kW), has 4 cylinders. The engine comes from John Deere. The unladen weight is 13,696 kg. The wheelbase measures 3,432 mm. Ground clearance is 481.6 mm. The tank holds 113.6 litres. The gearbox has 3 forward gears. The hydraulic tank holds 181.7 litres. The engine fitted is the 4045T. Tyre size: 1400 x 24-12 ply. The Terex Telescopic Forklift series covers 29 models. Rated output within it ranges from 63.9 to 154.1 hp; the TH1048C sits in the middle of that range with 116.6 hp. Its immediate neighbours are the 4518 below it with 103.4 hp and the TH1056C above it with 126.7 hp. 377 Terex models across 29 series are on record. The model is listed under Telehandlers. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine makeJohn Deerecorrect
Engine model4045Tcorrect
Power116.6 hp (85.8 kW)correct
Cylinders4correct

Dimensions and weights

Length8,080.2correct
Width2,590.8correct
Wheelbase3,432correct
Ground clearance481.6correct
Unladen weight13,696 kgcorrect

Drivetrain and chassis

Forward gears3correct
Tyre size1400 x 24-12 plycorrect

Working data

Hydraulic oil capacity181.7 lcorrect
Fuel tank capacity113.6 lcorrect

Where this model stands

Power-to-weight ratio: 6.3 kW/t (86 kW / 13.7 t)

Stronger than 67% of the telehandlers in the register — out of 658 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Terex TH1048C have?

The Terex TH1048C delivers 117 hp.

How much does the Terex TH1048C weigh?

The unladen weight is 13,696 kg.

What engine does the Terex TH1048C have?

4 cylinders.

What are the dimensions of the Terex TH1048C?

8,080 mm × 2,591 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Telehandler in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare