Start › Wheel loaders › Terex › PT70

Terex PT70

Series: Terex Multi Terrain Loader

Source: https://www.terex.com/cranes/en/product/rough-terrain/trt-10

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Terex PT70 is a model in the Terex Multi Terrain Loader series. The engine delivers 72 hp (52.9 kW), has 4 cylinders, with a displacement of 3,310.2 cm³. Rated speed is 2,800 rpm. The unladen weight is 3,578.8 kg. Ground clearance is 381 mm. The tank holds 68.1 litres. The hydraulic tank holds 79.5 litres. Working pressure is 206.8 bar. The cooling system holds 11.4 litres. The oil fill is 8.7 litres. The electrical system runs on 12 V. The engine fitted is the 804C-33T. The Terex Multi Terrain Loader series covers 6 models. Rated output within it ranges from 34.2 to 101.3 hp; the PT70 sits in the middle of that range with 72 hp. Its immediate neighbours are the PT60 below it with 60.8 hp and the PT80 above it with 84.2 hp. 377 Terex models across 29 series are on record. The model is listed under Wheel loaders. 16 verified figures from 1 source are on file.

Technical data

Engine

Engine model804C-33Tcorrect
Power72 hp (52.9 kW)correct
Rated speed2,800 rpmcorrect
Cylinders4correct
Displacement3,310.2 cm³correct
Aspirationturbochargedcorrect
Coolant capacity11.4 lcorrect
Engine oil capacity8.7 lcorrect

Dimensions and weights

Ground clearance381correct
Unladen weight3,578.8 kgcorrect

Drivetrain and chassis

System voltage12 Vcorrect

Working data

Hydraulic oil capacity79.5 lcorrect
Hydraulic pressure206.8correct
Fuel tank capacity68.1 lcorrect

Other data

Height2,212.8correct

Where this model stands

Power-to-weight ratio: 14.8 kW/t (53 kW / 3.6 t)

Stronger than 21% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Terex PT70 have?

The Terex PT70 delivers 72 hp.

How much does the Terex PT70 weigh?

The unladen weight is 3,579 kg.

What engine does the Terex PT70 have?

4 cylinders, 3,310 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

PT100G

PT30

PT50

PT60

PT80

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare