StartCrawler cranesTerex › HC165

Terex HC165

Series: Terex Crawler Crane

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Terex HC165 belongs to the Terex Crawler Crane series. The engine delivers 314.3 hp (231.2 kW). The engine comes from Cummins. Rated speed is 2,000 rpm. Ground clearance is 335.3 mm. The tank holds 424 litres. The hydraulic tank holds 499.7 litres. The engine fitted is the QSC8,3. The Terex Crawler Crane series covers 6 models. Rated output within it ranges from 187.6 to 314.3 hp; the HC165 sits at the top of that range with 314.3 hp. Its immediate neighbours are the HC110 below it with 233.2 hp. 377 Terex models across 29 series are on record. The model is listed under Cranes & access platforms. 8 verified figures from 1 source are on file.

Technical data

Engine

Engine makeCumminscorrect
Engine modelQSC8.3correct
Power314.3 hp (231.2 kW)correct
Rated speed2,000 rpmcorrect

Dimensions and weights

Ground clearance335.3correct

Working data

Hydraulic oil capacity499.7 lcorrect
Fuel tank capacity424 lcorrect

Frequently asked questions

How much power does the Terex HC165 have?

The Terex HC165 delivers 314 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tower crane in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare