Technical register for agricultural, construction and commercial machinery · sourced data

Terex AC120-1

Series: Terex All Terrain Crane

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Terex AC120-1 is a model in the Terex All Terrain Crane series. The engine delivers 475.9 hp (350 kW), has 8 cylinders, with a displacement of 15,928 cm³. Torque is 630 Nm. Rated speed is 1,800 rpm. The machine is 14,180 mm long and 2,750 mm wide. The unladen weight is 60,000 kg. Ground clearance is 277.4 mm. The gross vehicle weight is 71,700 kg. The gearbox has 16 forward gears. There are also 2 reverse gears. Maximum torque is reached at 1,080 rpm. The electrical system runs on 24 V. Tyre size: 14,00R25. The Terex All Terrain Crane series covers 41 models. Rated output within it ranges from 172.4 to 652.6 hp; the AC120-1 sits in the upper part of that range with 475.9 hp. Its immediate neighbours are the AC100/4 below it with 455.5 hp and the AC120 above it with 503.1 hp. Unladen weight within it ranges from 19,500 to 108,000 kg; here the AC120-1 sits in the middle of that range with 60,000 kg. 424 Terex models across 31 series are on record.

Terex/Demag AC: the number is the tonnage class, the history is Demag

The "AC" (All Terrain Crane) code plus a number follows, as with most mobile crane makers since the late 1990s, the maximum lifting capacity in tonnes: an AC 100 lifts roughly 100 tonnes, an AC 140 roughly 140 tonnes. In SpecCodex, the 41 recorded models span 19,500 to 108,000 kg of vehicle weight, reflecting the range from compact city cranes to heavy multi-axle units.

Read on 3 more paragraphs

The brand itself has had a turbulent path: the Zweibrücken plant belonged to Demag until 2002, then to Terex (briefly as "Terex-Demag"), the Demag name returned in 2016, and after Tadano's 2019 acquisition, AC cranes have carried the Tadano brand since 2021. A "Terex All Terrain Crane" in SpecCodex is therefore technically related to today's Demag/Tadano AC models.

A hyphenated value often appended (e.g. "-5") states the chassis axle count — an important factor for road registration and axle load. In the database, engine output ranges from 156 to 440 kW, torque from 540 to 3,186 Nm, and displacement from 5,961 to 15,928 cm³.

When buying used, check the condition of the boom telescoping section and outriggers, review the crane logbook for load-cycle counts, and confirm whether original parts are still available through today's brand owner, Tadano. Models such as AC25, AC70, AC100 and AC140 illustrate the spread of tonnage classes.

Sources: Kennwerte der Modelle Terex All Terrain Crane, Demag AC 700 (Wikipedia), Tadano Demag (Wikipedia), – Demag AC 100 Crane Overview, Bigge.com

Technical data

Engine

Power475.9 hp (350 kW)correct
Rated speed1,800 rpmcorrect
Torque630correct
Speed at max. torque1,080 rpmcorrect
Cylinders8correct
Displacement15,928 cm³correct

Dimensions and weights

Length14,180 mmcorrect
Width2,750 mmcorrect
Ground clearance277.4correct
Unladen weight60,000 kgcorrect
Gross vehicle weight71,700 kgcorrect

Drivetrain and chassis

Gearbox typeZF AS-Tronic electronically automatedcorrect
Forward gears16correct
Reverse gears2correct
Tyre size14.00R25correct

Other data

System voltage24 Vcorrect

Where this model stands

Power-to-weight ratio: 5.8 kW/t (350 kW / 60 t)

Stronger than 85% of the mobile & rough terrain cranes in the register — out of 723 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Terex AC120-1 have?

The Terex AC120-1 delivers 476 hp.

How much does the Terex AC120-1 weigh?

The unladen weight is 60,000 kg.

What is the gross vehicle weight of the Terex AC120-1?

71,700 kg.

What engine does the Terex AC120-1 have?

8 cylinders, 15,928 cm³ displacement.

What are the dimensions of the Terex AC120-1?

14,180 mm × 2,750 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Mobile crane in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare