Technical register for agricultural, construction and commercial machinery · sourced data
Start › Electric motors › Tema › Y315M-4

Tema Y315M-4

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Tema Y315M-4 is a three-phase induction motor. The rated output is 132 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The housing is frame size 315 M in foot-mounted form. The protection class is IP55. The efficiency is 95 per cent at full load, 94.5 per cent at 75 per cent load and 93.4 per cent at half load. Mounting arrangements to IEC 60034-7: B3 and B35. The motor is built in China. The values are recorded in the Australian MEPS registration under the GEMS Determination 2012; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Tema range ranges from 30 to 160 kW; the Y315M-4 sits in the upper part of that range with 132 kW. Its immediate neighbours are the Y280M2-4 below it with 110 kW and the Y315L1-4 above it with 160 kW. 30 Tema models across 4 series are on record.

Tema – other models: the collective page of MEPS-registered large three-phase motors outside the named ranges, frame sizes 200 to 315, 30 to 160 kW, two- to four-pole, efficiency up to 95.2%

This page gathers the three-phase motors that the Australian energy-efficiency register (GEMS/MEPS) lists under the Tema brand without assigning them to a named range. The four versions carry the designations Y200L1-2, Y280M2-4, Y315L1-4 and Y315M-4. China is recorded throughout as the country of manufacture.

Read on 3 more paragraphs

The register lists here four versions with 30 to 160 kW rated output, two- to four-pole, rated for a dual 415/690 V supply. Full-load efficiency ranges from 94.1 to 95.2%, and at 75% load from 94.2 to 94.7%. Frame sizes fall between 200 and 315, the protection class is IP55 throughout. Mounting forms span B3, B5 and B35 in various combinations; testing mostly followed the Greenhouse and Energy Minimum Standards Determination 2012, with test method A.

With outputs up to 160 kW and frame sizes up to 315, the range covers the upper band of classic three-phase standard motors used on industrial-scale compressors, pumps, fans and conveyors; the dual 415/690 V rating allows star or delta operation across different supply voltages.

On a used purchase or replacement, bearing condition, a tested winding insulation resistance, visible overheating traces at the terminal box and fan cover, and a legible nameplate with frame size, pole count and protection class all count. At these power classes, a vibration measurement at the bearing shield is also worthwhile. Spare parts are available through general electric-motor suppliers.

Sources: Kennwerte der Modelle Tema (weitere Elektromotoren, MEPS-Registrierung)

Technical data

Engine

Rated output132 kWcorrect

Electrical data

Rated voltage415/690 Vcorrect
Number of poles4correct
Protection classIP55correct
Frame size315 M (foot)correct
Mounting (IEC 60034-7)B3, B35correct
Efficiency at full load95 %correct
Efficiency at 75 % load94.5 %correct
Efficiency at half load93.4 %correct

Origin and approval

Country of manufactureChinacorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Tema Y315M-4 have?

The Tema Y315M-4 delivers 132 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare