StartExcavators & compactionTakraf › Bagger 293

Takraf Bagger 293

Series: Other models

Wikimedia Commons · CC BY 3.0 · Elsdorf-blog.de · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Takraf Bagger 293 is an excavator from Takraf. 16.6 kW is available.

It measures 738 mm in length, 151 mm in width and 315 mm in height. In service, it weighs 14,200 kg.

Technical data

Engine

Power16.56 megawatts of externally supplied electricitycorrect

Dimensions and weights

Length738.2 ft m 0correct
Width151 ft m 0correct
Height314.9 ft m 0correct
Unladen weight14, 200 tonne lbcorrect

Frequently asked questions

How much power does the Takraf Bagger 293 have?

The Takraf Bagger 293 delivers 16.6 kW.

How much does the Takraf Bagger 293 weigh?

The unladen weight is 14,200 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare