Sumitomo SH75XU-3
Series: Sumitomo Midi Excavator
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | 4TNE98correct |
|---|---|
| Power | 42.5 kWcorrect |
| Rated speed | 2,000 rpmcorrect |
| Displacement | 3,318.4 cm³correct |
Dimensions and weights
| Ground clearance | 411.5correct |
|---|---|
| Unladen weight | 7,800 kgcorrect |
Working data
| Hydraulic oil capacity | 95 lcorrect |
|---|---|
| Hydraulic pressure | 294 barcorrect |
| Fuel tank capacity | 100.3 lcorrect |
Other data
| Cab height | 2,721.9correct |
|---|
More machines with this engine (4TNE98, 11)
Where this model stands
Power-to-weight ratio: 5.4 kW/t (42 kW / 7.8 t)
Stronger than 13% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Sumitomo SH75XU-3 have?
The Sumitomo SH75XU-3 delivers 42.5 kW.
How much does the Sumitomo SH75XU-3 weigh?
The unladen weight is 7,800 kg.
What engine does the Sumitomo SH75XU-3 have?
3,318 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Excavator in 3D section
Turn the model, look inside and click an assembly — each one is explained.