Subaru SUMO
Built: 1988-1988 · Series: SUMO
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine | 1.0 L EF10 I3; 1.2 L EF12 I3correct |
|---|---|
| Fuel | Diesel | Gas | Petrolcorrect |
Dimensions and weights
| Length | 3425 mm (1983–1993); 3525 mm (1993–1998)correct |
|---|---|
| Width | 1430 mm (1983–1993); 1415 mm (1993–1998)correct |
| Height | 1,925correct |
| Unladen weight | 1,040correct |
Drivetrain and chassis
| Gearbox | 5-speed manual gearbox; Econtinuously variable transmission automatic gearboxcorrect |
|---|
Origin and approval
| Body | Cab-over vancorrect |
|---|---|
| Version | SUMOcorrect |
| Number of versions | 2correct |
| Built from | 1988correct |
| Built to | 1994correct |
| First registered from | 1,988correct |
| First registered to | 1,994correct |
| Vehicle class | Microvancorrect |
Frequently asked questions
When was the Subaru SUMO built?
Production years: 1988.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 20 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.