Steinbock Boss PE 20/300Z
Series: Steinbock Boss Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Steinbock Boss PE 20/300Z is a forklift truck from the Steinbock Boss Forklift series. The engine is rated at 11.6 kW.
At 6 km/h, that is as fast as it goes. In service, it weighs 3,800 kg. Capacity is 2,000 kg.
Within the range, rated power spans from 4 to 11.6 kW; with 11.6 kW, the PE 20/300Z sits at the top. Below it ranks the JE 15/550D with 4 kW.
Technical data
Engine
| Engine model | Electric Motorcorrect |
|---|---|
| Power | 11.6 kWcorrect |
Dimensions and weights
| Width | 1,120 mmcorrect |
|---|---|
| Ground clearance | 120.1 mmcorrect |
| Unladen weight | 3,800 kgcorrect |
Drivetrain and chassis
| Tyre type | pneumatic tyrescorrect |
|---|---|
| Top speed | 6.3 km/hcorrect |
| Turning radius | 1,880 mmcorrect |
Working data
| Lifting capacity | 2,000 kgcorrect |
|---|---|
| Lift height | 3,550 mmcorrect |
Other data
| Front wheels | 2correct |
|---|---|
| Lift speed | 37.2 m/mincorrect |
| Load centre | 500.1 mmcorrect |
| Mast tilt back | 8°correct |
| Mast tilt forward | 6°correct |
| Rear wheels | 2correct |
| Senkgeschwindigkeit mmin | 30.6 m/mincorrect |
Where this model stands
Power-to-weight ratio: 3.1 kW/t (12 kW / 3.8 t)
Stronger than 33% of the forklift trucks in the register — out of 316 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Steinbock Boss PE 20/300Z have?
The Steinbock Boss PE 20/300Z delivers 11.6 kW.
How much does the Steinbock Boss PE 20/300Z weigh?
The unladen weight is 3,800 kg.
How fast does the Steinbock Boss PE 20/300Z go?
Top speed is 6.3 km/h.
What is the load capacity of the Steinbock Boss PE 20/300Z?
Load capacity is 2,000 kg at a 500 mm load centre, lift height 3,550 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.