Steinbock Boss JE 13/500D
Series: Steinbock Boss Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a forklift truck, the Steinbock Boss JE 13/500D belongs to the Steinbock Boss Forklift series. The engine produces 4 kW.
At 13 km/h, that is as fast as it goes. In service, it weighs 2,730 kg. It carries 1,000 kg.
Within the range, rated power spans from 4 to 11.6 kW; with 4 kW, the JE 13/500D sits at the bottom end. The next one up is the PE 20 with 11.6 kW.
Technical data
Engine
| Engine model | Electric motorcorrect |
|---|---|
| Power | 4 kWcorrect |
Dimensions and weights
| Width | 990 mmcorrect |
|---|---|
| Ground clearance | 90.2 mmcorrect |
| Unladen weight | 2,730 kgcorrect |
Drivetrain and chassis
| Tyre type | cushion tyrescorrect |
|---|---|
| Top speed | 12.6 km/hcorrect |
| Turning radius | 1,400 mmcorrect |
Working data
| Lifting capacity | 1,000 kgcorrect |
|---|---|
| Lift height | 5,000 mmcorrect |
Other data
| Front wheels | 2correct |
|---|---|
| Gabelspreizung mm | 978.2 mmcorrect |
| Lift speed | 30 m/mincorrect |
| Load centre | 500.1 mmcorrect |
| Mast tilt back | 5°correct |
| Mast tilt forward | 7°correct |
| Rear wheels | 1correct |
| Senkgeschwindigkeit mmin | 31.2 m/mincorrect |
Where this model stands
Power-to-weight ratio: 1.5 kW/t (4 kW / 2.7 t)
Stronger than 1% of the forklift trucks in the register — out of 316 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Steinbock Boss JE 13/500D have?
The Steinbock Boss JE 13/500D delivers 4 kW.
How much does the Steinbock Boss JE 13/500D weigh?
The unladen weight is 2,730 kg.
How fast does the Steinbock Boss JE 13/500D go?
Top speed is 12.6 km/h.
What is the load capacity of the Steinbock Boss JE 13/500D?
Load capacity is 1,000 kg at a 500 mm load centre, lift height 5,000 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.