Steiger Cougar ST 300 1
Built: 1971–1974 · Series: 1
More machines from model year 1971
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Steiger Cougar ST 300 1 is a tractor from the 1 series, built in 1971–1974. It runs on a six-cylinder engine.
The gearbox is a 10/2 unit. At 23 km/h, that is as fast as it goes. Empty, it weighs 13,300 kg.
Technical data
Engine
| Cylinders | 6correct |
|---|
Dimensions and weights
| Unladen weight | 13,300 kgcorrect |
|---|
Drivetrain and chassis
| Gearbox | 10/2correct |
|---|---|
| Top speed | 22.7 km/hcorrect |
Origin and approval
| Construction | Standardrahmenausführung (ST)correct |
|---|
Frequently asked questions
How much does the Steiger Steiger Cougar ST 300 1 weigh?
The unladen weight is 13,300 kg.
What engine does the Steiger Steiger Cougar ST 300 1 have?
6 cylinders.
How fast does the Steiger Steiger Cougar ST 300 1 go?
Top speed is 22.7 km/h.
When was the Steiger Steiger Cougar ST 300 1 built?
Production years: 1971–1974.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.