Stas SS122V
Built: 1999-1999 · Series: Other models
More machines from model year 1999
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Stas – other models: collective page of the Belgian tipper and walking-floor specialist outside the named ranges, O, A and S series, gross weight from 12 to 48 t
This page gathers Stas semi-trailers that the register could not assign to a named range. The Belgian manufacturer specialises in tipping and walking-floor semi-trailers; the O, A and S model series are accompanied by a multi-digit number and often the suffix Fak or Ha, marking different versions of the body within the series.
Read on 3 more paragraphs
The register lists here 64 versions with unladen weights from 3,090 to 22,130 kg, gross vehicle weights from 12,000 to 48,000 kg, lengths from 8,550 to 14,040 mm and widths from 2,480 to 2,600 mm.
Tipping and walking-floor semi-trailers such as Stas's carry bulk goods, agricultural produce and recyclable material, making them a fixed part of agricultural, construction and waste logistics; in the European market for tipping semi-trailers, Stas competes with makers such as Fliegl and Langendorf; walking-floor technology also allows gentle unloading of sensitive goods without a tipping action.
When buying used, what counts is the condition and tightness of the body, the function of the tipping hydraulics or walking-floor drive, frame cracks from the alternating tipping loads, and the condition of the braking system and axles; also the condition of the fifth-wheel coupling and, on walking-floor semi-trailers, even movement of the floor slats. Spare parts for the hydraulics and walking floor are available through Stas and the trailer specialist trade.
Sources: Kennwerte der Modelle Stas (weitere Modelle), Stas (Hersteller)
Technical data
Dimensions and weights
| Width | 2,480 mmcorrect |
|---|---|
| Wheelbase | 720 mmcorrect |
| Unladen weight | 6,250 kgcorrect |
| Gross vehicle weight | 22,000 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Stas SS122V weigh?
The unladen weight is 6,250 kg.
What is the gross vehicle weight of the Stas SS122V?
22,000 kg.
Up to what speed is the Stas SS122V approved?
Approved up to 100 km/h.
When was the Stas SS122V built?
Production years: 1999.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
-
0 34 3 FAK
0 39 3FAK
0 3913 FAK
0 43 3FAK
0-12-PE
0-18-BPE
0-34/3FAK
0-38/3DA
0-38/SBR
0-39/3A
0-39/3HA
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.