Stas SA 339 K
Built: 2001-2001 · Series: SA
More machines from model year 2001
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Stas SA – walking-floor and tipping trailers of the Belgian manufacturer from Waregem in the SpecCodex register: 10 versions with gross weights from 38,000 to 46,000 kg, lengths up to 14,000 mm
Stas SA denotes a range in the SpecCodex register from the Belgian manufacturer Stas of Waregem, which specialises in walking-floor and tipping trailers for carrying bulk goods. The models carry designations such as SA 339K, SA 343 K or SA 345K, each with the suffix K.
Read on 3 more paragraphs
The register lists here 10 versions with unladen weights from 3,640 to 8,750 kg, gross weights from 38,000 to 46,000 kg, lengths from 8,780 to 14,000 mm and a uniform width of 2,550 mm.
Walking-floor trailers unload bulk material by moving floor slats that push the load out of the back of the body, which compared with tipping brings advantages at low body height and when unloading under low shed roofs; with this technology Stas mainly supplies the agricultural, recycling and building-materials sectors in Belgium and neighbouring countries. The letter K in the type designation marks the respective tipping or walking-floor version within the SA range.
On a used walking-floor or tipping trailer, the condition of the push walls, slats or tipping body should be checked, along with the hydraulic cylinders and lines, the tailgate and its locking, plus frame, axles and braking system; corrosion and wear on the moving floor parts are the typical weak points. Stas supplies spare parts for the hydraulics through its own service network.
Technical data
Dimensions and weights
| Length | 10,170 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 7,880 mmcorrect |
| Unladen weight | 6,480 kgcorrect |
| Gross vehicle weight | 39,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Stas SA 339 K weigh?
The unladen weight is 6,480 kg.
What is the gross vehicle weight of the Stas SA 339 K?
39,000 kg.
Up to what speed is the Stas SA 339 K approved?
Approved up to 100 km/h.
What are the dimensions of the Stas SA 339 K?
10,170 mm × 2,550 mm.
When was the Stas SA 339 K built?
Production years: 2001.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.