Spa TL.37
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Spa TL.37 is a tractor made by Spa.
Power is transmitted through a 4 forward 1 reverse gearbox. Length is 4 mm, with 2 mm width and 2 mm in height. Unladen, it tips the scales at 3,560 kg.
Technical data
Engine
| Engine | 4 cylinder of 4, 053 cm3 developing 52 hp at 2, 000 rpmcorrect |
|---|
Dimensions and weights
| Length | 4,130correct |
|---|---|
| Width | 1,830correct |
| Height | 2,180correct |
| Unladen weight | 3560 kg lbcorrect |
Drivetrain and chassis
| Gearbox | 4 forward 1 reversecorrect |
|---|
Frequently asked questions
How much does the Spa TL.37 weigh?
The unladen weight is 3,560 kg.
What are the dimensions of the Spa TL.37?
4,130 mm × 1,830 mm × 2,180 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.