StartHarvesting machinerySenor › JE-50

Senor JE-50

Built: 1965-1965 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Senor JE-50 is a machine built by Senor. Production: 1965. The engine delivers 85 hp (63 kW), has 6 cylinders. The engine comes from Perkins. Rated speed is 2,600 rpm. The engine is water-cooled. The model was built in San Vicente, Santa Fe, Argentina. The fuel is diesel. The engine fitted is the 6-305. Rated output within this group ranges from 18.5 to 625 hp; the JE-50 sits at the bottom of that range with 85 hp. Its immediate neighbours are the 22 combine below it with 84 hp and the 2035 above it with 87 hp. 5 Senor models are on record. The model is listed under Harvesting machinery. 13 verified figures from 1 source are on file.

Technical data

Engine

Engine makePerkinscorrect
Engine model6-305correct
Fueldieselcorrect
Power85 hp (63 kW)correct
Rated speed2,600 rpmcorrect
Cylinders6correct
Turbochargernocorrect
Coolingwater-cooledcorrect

Working data

Fuel tank capacity130correct

Origin and approval

PlantSan Vicente, Santa Fe, Argentinacorrect

More machines with this engine (Perkins 6-305, 2)

Frequently asked questions

How much power does the Senor JE-50 have?

The Senor JE-50 delivers 85 hp.

What engine does the Senor JE-50 have?

6 cylinders, Diesel.

When was the Senor JE-50 built?

Production years: 1965.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare