StartForklift trucksSchaeff › SE80

Schaeff SE80

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Schaeff SE80 is a forklift truck made by Schaeff.

At 14 km/h, that is as fast as it goes. In service, it weighs 6,656 kg. It carries 3,650 kg.

Technical data

Engine

Engine modelelectric enginecorrect

Dimensions and weights

Width1,340 mmcorrect
Ground clearance101.6 mmcorrect
Unladen weight6,656 kgcorrect

Drivetrain and chassis

Tyre typecushion tyrescorrect
Top speed13.8 km/hcorrect
Turning radius2,170 mmcorrect

Working data

Lifting capacity3,650 kgcorrect
Lift height4,780 mmcorrect

Other data

Front wheels2correct
Lift speed19.8 m/mincorrect
Load centre500.1 mmcorrect
Mast tilt backcorrect
Mast tilt forwardcorrect
Rear wheels2correct
Senkgeschwindigkeit mmin21.3 m/mincorrect

Frequently asked questions

How much does the Schaeff SE80 weigh?

The unladen weight is 6,656 kg.

How fast does the Schaeff SE80 go?

Top speed is 13.8 km/h.

What is the load capacity of the Schaeff SE80?

Load capacity is 3,650 kg at a 500 mm load centre, lift height 4,780 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Forklift in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare