Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Scania › S450

Scania S450

Built: 2017-2024 · Series: Trucks over 12 t (Class N3)

More machines from model year 2017

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The S450 from Scania is part of the Trucks over 12 t (Class N3) series. Production: 2017-2024. The engine delivers 331 kW, has 6 cylinders, with a displacement of 12,742 cm³. The machine is 11,900 mm long and 2,600 mm wide. The unladen weight is 21,360 kg. The wheelbase measures 7,700 mm. Top speed is 90 km/h. The gross vehicle weight is 29,800 kg. The machine runs on 10 wheels. The gearbox offers 12 gears. The Trucks over 12 t (Class N3) series covers 5780 models. Rated output within it ranges from 103 to 566 kW; the S450 sits in the middle of that range with 331 kW. Its immediate neighbours are the R 143 HL-A-6X4/460+136 below it with 330 kW and the R 143 M(L)-A-ASA80-6X2/420+136 above it with 332 kW. Unladen weight within it ranges from 3,718 to 49,350 kg; here the S450 sits in the lower part of that range with 21,360 kg. 11893 Scania models across 91 series are on record.

Reading a Scania — what 93, 113, 124 and 142 tell you

Scania type designations are not arbitrary but a system: the leading digits give the displacement in litres, the last one the series. A 113 is therefore an eleven-litre from the 3-series, a 143 a fourteen-litre of the same generation, a 124 a twelve-litre from the 4-series. The 142, in turn, is a fourteen-litre of the older 2-series. Learn this once and every Scania plate becomes readable.

Read on 4 more paragraphs

The 3-series arrived in 1988 and was replaced by the 4-series in 1995. It covered a remarkable span: from 9 litres with 230 hp to the 14-litre V8 with 500 hp — the same series, from distribution work to heavy haulage. The 3-series was voted Truck of the Year in 1989, cited for ride comfort and economical, reliable engines.

With the 3-series Scania also introduced the Streamline name. Behind it lay more than cosmetics: a revised bumper, a redesigned grille with lower drag and an improved wind deflector on the driver's side. Inside came a curved dashboard, and the engines were reworked.

For the used market this means: two generation changes and some fifteen years of development lie between a 142 and a 124, even though both carry fourteen- and twelve-litre numbers. The number alone says nothing about age — the final digit does.

Many entries in this class come from official registration data. Dimensions, weights and axle counts are reliable; the exact engine variant of an individual vehicle is not always recorded.

Sources: Wikipedia: Scania Serie 3 (Wikipedia), (Wikipedia), eurotransport

Technical data

Engine

Power331 kWcorrect
Cylinders6correct
Displacement12,742 cm³correct

Dimensions and weights

Length11,900 mmcorrect
Width2,600 mmcorrect
Wheelbase7,700 mmcorrect
Unladen weight21,360 kgcorrect
Gross vehicle weight29,800 kgcorrect

Drivetrain and chassis

Gears12correct
Wheels10correct
Top speed90 km/hcorrect

Where this model stands

Power-to-weight ratio: 15.5 kW/t (331 kW / 21.4 t)

Stronger than 67% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Scania S450 have?

The Scania S450 delivers 331 kW.

How much does the Scania S450 weigh?

The unladen weight is 21,360 kg.

What is the gross vehicle weight of the Scania S450?

29,800 kg.

What engine does the Scania S450 have?

6 cylinders, 12,742 cm³ displacement.

How fast does the Scania S450 go?

Top speed is 90 km/h.

What are the dimensions of the Scania S450?

11,900 mm × 2,600 mm.

When was the Scania S450 built?

Production years: 2017-2024.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare