Technical register for agricultural, construction and commercial machinery · sourced data
StartTrucks over 7.5 tScania › P340

Scania P340

Built: 2005-2026 · Series: Trucks over 12 t (Class N3)

More machines from model year 2005

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Scania P340 is a machine built by Scania. Production: 2005-2026. The engine delivers 250 kW, has 6 cylinders, with a displacement of 9,291 cm³. The machine is 11,180 mm long and 2,550 mm wide. The unladen weight is 21,231 kg. The wheelbase measures 9,530 mm. Top speed is 90 km/h. The gross vehicle weight is 35,800 kg. The machine runs on 8 wheels. The gearbox offers 10 gears. Rated output across the Scania range ranges from 69 to 566 kW; the P340 sits in the lower part of that range with 250 kW. Its immediate neighbours are the 113 H-6X2 below it with 249.5 kW and the G340 above it with 250.5 kW. 7586 Scania models across 18 series are on record. The model is listed under Trucks over 7.5 t. 15 verified figures from 1 source are on file.

Reading a Scania — what 93, 113, 124 and 142 tell you

Scania type designations are not arbitrary but a system: the leading digits give the displacement in litres, the last one the series. A 113 is therefore an eleven-litre from the 3-series, a 143 a fourteen-litre of the same generation, a 124 a twelve-litre from the 4-series. The 142, in turn, is a fourteen-litre of the older 2-series. Learn this once and every Scania plate becomes readable.

Read on 4 more paragraphs

The 3-series arrived in 1988 and was replaced by the 4-series in 1995. It covered a remarkable span: from 9 litres with 230 hp to the 14-litre V8 with 500 hp — the same series, from distribution work to heavy haulage. The 3-series was voted Truck of the Year in 1989, cited for ride comfort and economical, reliable engines.

With the 3-series Scania also introduced the Streamline name. Behind it lay more than cosmetics: a revised bumper, a redesigned grille with lower drag and an improved wind deflector on the driver's side. Inside came a curved dashboard, and the engines were reworked.

For the used market this means: two generation changes and some fifteen years of development lie between a 142 and a 124, even though both carry fourteen- and twelve-litre numbers. The number alone says nothing about age — the final digit does.

Many entries in this class come from official registration data. Dimensions, weights and axle counts are reliable; the exact engine variant of an individual vehicle is not always recorded.

Sources: Scania Serie 3 (Wikipedia), , eurotransport

Technical data

Engine

Power250 kWcorrect
Cylinders6correct
Displacement9,291 cm³correct

Dimensions and weights

Length11,180 mmcorrect
Width2,550 mmcorrect
Wheelbase9,530 mmcorrect
Unladen weight21,231 kgcorrect
Gross vehicle weight35,800 kgcorrect

Drivetrain and chassis

Gears10correct
Wheels8correct
Top speed90 km/hcorrect

Where this model stands

Power-to-weight ratio: 11.8 kW/t (250 kW / 21.2 t)

Stronger than 40% of the trucks over 7.5 t in the register — out of 25,424 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Scania P340 have?

The Scania P340 delivers 250 kW.

How much does the Scania P340 weigh?

The unladen weight is 21,231 kg.

What is the gross vehicle weight of the Scania P340?

35,800 kg.

What engine does the Scania P340 have?

6 cylinders, 9,291 cm³ displacement.

How fast does the Scania P340 go?

Top speed is 90 km/h.

What are the dimensions of the Scania P340?

11,180 mm × 2,550 mm.

When was the Scania P340 built?

Production years: 2005-2026.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
3 current listings for Scania P340 on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare