Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Scania › 93 M-SCAE2100-A-6X2

Scania 93 M-SCAE2100-A-6X2

Built: 1991 · Series: G

More machines from model year 1991

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Scania 93 M-SCAE2100-A-6X2 belongs to the G series. Production: 1991. The engine delivers 185 kW, with a displacement of 8,480 cm³. The machine is 2,500 mm wide. The unladen weight is 8,800 kg. The gross vehicle weight is 24,500 kg. The G series covers 265 models. Rated output within it ranges from 140 to 412 kW; the 93 M-SCAE2100-A-6X2 sits in the lower part of that range with 185 kW. Its immediate neighbours are the 82M -A/500 below it with 170 kW and the 270 4X2 above it with 199 kW. Unladen weight within it ranges from 6,750 to 26,600 kg; here the 93 M-SCAE2100-A-6X2 sits at the bottom of that range with 8,800 kg. 11893 Scania models across 91 series are on record.

Scania G-series – mid-height cab between P and R since 2004: 9 to 13-litre units, diesel and natural gas, 140 to 412 kW, articulated combinations up to 49 t

The G-series complemented Scania's cab lineup in 2004, alongside the second-generation model range (PGRT series), sitting between the lower P cab and the tall R cab, offering a mid-height roof for drivers who want standing height without the full long-haul kit of the R-series; a new generation (G-series NTG) followed in 2016 with an entirely new cab. The type designation consists of a three-digit power figure in horsepower (230 to 620 depending on engine) and the axle formula (4X2, 6X2, 6X4, 8X4); the letter A or B marks older series levels, and codes such as HNB denote particular axle configurations.

Read on 3 more paragraphs

The register lists 265 versions with 140 to 412 kW output, displacements of 7,780 to 13,000 cm³ across 5 to 8 cylinders, unladen weights of 6,750 to 27,930 kg, gross weights of 16,500 to 49,000 kg and lengths of 5,940 to 13,510 mm; alongside diesel, the fuel entries also include natural-gas (NG) and biomethane variants.

Within Scania's range the G-series covers everything from heavy distribution work to long-haul and construction transport, competing with the mid cabs of the Mercedes-Benz Actros, Volvo FH and MAN TGS; the gas-engine variants target hauliers with a local-delivery or public-transport-adjacent duty cycle.

On used examples, check rust on the frame and axle mounts, condition of the clutch and Opticruise gearbox, air-suspension sealing, and on gas engines additionally the age and inspection intervals of the gas tanks, plus a documented service history through the Scania workshop network.

Sources: SpecCodex register, model data: Scania G, Scania (manufacturer)

Technical data

Engine

Power185 kWcorrect
Displacement8,480 cm³correct

Dimensions and weights

Width2,500 mmcorrect
Unladen weight8,800 kgcorrect
Gross vehicle weight24,500 kgcorrect

Where this model stands

Power-to-weight ratio: 21 kW/t (185 kW / 8.8 t)

Stronger than 27% of the trucks in the register — out of 25,241 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Scania 93 M-SCAE2100-A-6X2 have?

The Scania 93 M-SCAE2100-A-6X2 delivers 185 kW.

How much does the Scania 93 M-SCAE2100-A-6X2 weigh?

The unladen weight is 8,800 kg.

What is the gross vehicle weight of the Scania 93 M-SCAE2100-A-6X2?

24,500 kg.

What engine does the Scania 93 M-SCAE2100-A-6X2 have?

8,480 cm³ displacement.

When was the Scania 93 M-SCAE2100-A-6X2 built?

Production years: 1991.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare