Start › Grapples › SATCO › 676f

SATCO 676f

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The SATCO 676f is part of the Grapples category from SATCO. It is a grapple used for grabbing, sorting and handling material. It belongs to the Weitere Modelle series. The equipment type is Forestry grapple. It fits carrier machines from 16 to 24 tonnes operating weight. The unladen weight is 1,200 kg. The figures come from the manufacturer's data sheet and describe the base configuration; other equipment variants are possible. Unladen weight across the SATCO range ranges from 1,050 to 4,400 kg; the 676f sits at the bottom of that range with 1,200 kg. Its immediate neighbours are the 676 below it with 1,050 kg and the 420 above it with 1,550 kg. 17 SATCO models across 3 series are on record. The model is listed under Grapples. 4 verified figures from 2 sources are on file.

Technical data

Dimensions and weights

Unladen weight	1,200correct

Other data

Carrier max.	24correct
Carrier min.	16correct

Frequently asked questions

How much does the SATCO 676f weigh?

The unladen weight is 1,200 kg.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 4 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →